Home > News > Technological Innovation

Technological Innovation

IEC 60061-3 Lamp Caps and Holders Gauges for Control of Interchangeability and Safety

Standards & Clauses:

IEC 60061-3:2015 “Lamp caps and holers together with gauges for the control of interchangeability and safety –Part 3:Gauges,MOD”

IEC 60238:2017 “Edsion screw lampholders”

IEC 61184:2017 “Bayonet lampholders”

 

Samples and Restrictions:

Screw, bi-pin, prefocus, miscellaneous, bayonet lamp caps and holders

 

Application:

To check whether the dimensions and shapes of the lamp caps and holders meet standard requirements by using the various types of lamp caps and lamp holders interchangeable size gauge.

 

Test Principle:

Measure the shape and size of the lamp cap or holder by using the corresponding gauge, to verify the lamp cap or holder is compliant with the standard range.

 

Structure:

Please refer to the figures in the standards.

 

Technical Parameters:

 

No.: Category Name Standard Figure
1 E14 Lamp Cap E14 Lam Cap “Go” Gauge 7006-27F-1
2 E14 Lamp Cap “Not Go” Gauge 7006-28B-1
3 E14 Lamp Cap Prevent Accidental Contact Gauge 7006-55-2
4 E14S1 Lamp Cap “Go” Gauge 7006-27G-1
5 E14 Lamp Cap Contacting Making Gauge 7006-54-2
6 E14 Lamp Cap Torque Test Gauge IEC60968Fig2
7 e27 Lamp Cap E27 Lam Cap “Go” Gauge 7006-27B-1
8 E27 Lamp Cap“Not Go” Gauge 7006-28A-1
9 E27S1 Lamp Cap “Go” Gauge 7006-27C-1
10 E27 Lamp Cap Contacting Making Gauge 7006-50-1
11 E27 Lamp Cap Prevent Accidental Contact Gauge 7006-51A-2
12 E27 Lamp Cap Prevent accidental contact gauge 51*39 7006-51-2
13 E27 Lamp Cap Torque Test Gauge IEC60968Fig2
14 B15 Lamp Cap B15 Lamp Cap Insertion Gauge 7006-4A-2
15 B15 Lamp Cap Retention Gauge 7006-4B-1
16 B15 Lamp Cap “Not Go” Gauge 7006-10-8
17 B15 Lamp Cap “Go” Gauge 7006-11-8
18 B15 Lamp Cap Torque Test Gauge IEC60968Fig3
19 B22d Lamp Cap B22 Lamp Cap Insertion Gauge 7006-4A-2
20 B22 Lamp Cap Retention Gauge 7006-4B-1
23 B22 Lamp Cap “Go” Gauge 7006-10-8
24 B22 Lamp Cap “Not Go” Gauge 7006-11-8
25 B22D Lamp Cap Acceptance Gauge 7006-3-1
26 BY22d Lamp Cap “Go” Gauge 7006-17A-1
27 B22 Lamp Cap Torque Test Gauge IEC60968Fig3
28 GZ10 Lamp Cap “Go” / “Not Go” Gauge 7006-120-1
29 GZ10 Lamp Holder “Go” / “Not Go” Gauge 7006-120A-1
30 GU10 Lamp Holder “Go” / “Not Go” Gauge 7006-121A-1
31 GU10 Lamp Cap GU10 Lamp Cap “Go” / “Not Go” Gauge 7006-121-1
32 E26 Lamp Cap E26 Lamp Cap “Go” Gauge 7006-27D-3
33 E26 Lamp Cap “Not Go” Gauge 7006-29L-4
34 E26d Lamp Cap Prevent Accidental Contact Gauge 7006-29A-2
35 E26 Lamp Cap Contacting Making Gauge 7006-29-3
36 E26d Lamp Cap Reference Diameter 23mm “Go” Gauge 7006-29B-2
37 E26d Lamp Cap Reference Diameter 13.2mm “Go” Gauge 7006-29C-2
38 E26d Lamp Cap Reference Diameter 10.4mm “Go” Gauge 7006-29D-1
39 E26 Lamp Cap 7006-27E-1
40 E14 Lamp Holder “Go” Gauge 7006-25-7
41 “Not Go” Gauge 7006-26-4
42 Contacting Making Gauge 7006-30-2
43 Candle Lamp Contacting Making Gauge 7006-30A-1
43 Prevent Accidental Contact Gauge 7006-31-4
44 Torque Test Cap IEC 60238 Figure5
45 Test Cap "A" IEC 60238 Figure13
46 Test Cap "b" IEC 60238 Figure13
47 E27 Lamp Holder “Go” Gauge 7006-25A-2
48 “Not Go” Gauge 7006-26-4
49 Prevent Accidental Contact Gauge 7006-22A-4
50 Anti-bulb Neck Damage and Contacting Making Gauge 7006-21-5
51 Inside Shrapnel Resilience Gauge 7006-22D-1
52 Side Contacts Edge Gauge 7006-22B-1
53 Side Contacts Resilience Gauge 7006-22C-1
54 Torque Test Cap IEC 60238 Figure5
55 Aging test cap IEC 60238 Figure14
56 E40 Lamp Cap “Go” Gauge 7006-27-7
57 “Not Go” Gauge 7006-28D-1
58 Prevent Accidental Contact Gauge 7006-53-1
59 Contacting Making Gauge 7006-52-1
60

B22 Lamp Holder








Plug Gauge 7006-12-8
61 Gauge for checking contact position and contact force in (90°-130°) 7006-15-7
62 Gauge for checking contact position and contact force(90°-130°) 7006-20-4
63 Supplementary “Go” Gauge 7006-12A-2
64 “Not Go”/ Retention Gauge 7006-12B-2
65 Gauge for checking contact position and contact force 7006-15A-2
66 Gauge for the slots in lampholders 7006-13-5
67 Plug Gauge 7006-17B-1
68

E12 Lamp Cap




“Go” Gauge 7006-27H-1
69 “Not Go” Gauge 7006-28C-1
70 Supplementary “Go” Gauge 7006-27J-1
71 Contacting Making Gauge 7006-32-1
72

E17 Lamp Cap



“Go” Gauge 7006-27K-1
73 “Not Go” Gauge 7006-28F-1
74 Contacting Making Gauge 7006-26D-1
75

E39 Lamp Cap



“Go” Gauge 7006-24B-1
76 “Not Go” Gauge 7006-24C-1
77 Contacting Making Gauge 7006-24A-1
78 E40 Lamp Holder “Go” Gauge 7006-25-7
79 “Not Go” Gauge 7006-26-4
80 Prevent Accidental Contact Gauge 7006-24-3
81 Contacting Making Gauge 7006-23-3
82 1EP10 Lamp Cap “Not Go” Gauge 7006-28-7
83 2EP10 Lamp Cap “Go” Gauge 7006-37-1
84 3EY10 Lamp Cap “Go” Gauge 7006-7-1
85 4E10 Lamp Cap “Go” Gauge 7006-27A-2
86

G5 Lamp Cap


“Go” and “Not Go” Gauge for Unfinished Bi-pin Cap 7006-46-3
87 “Go” Gauge for Bi-pin Cap on Finished Lamps 7006-46A-3
88

G13 Lamp Cap


“Go” and “Not Go” Gauge for Unfinished Bi-pin Cap 7006-44-4
89 “Go” Gauge for Bi-pin Cap on Finished Lamps 7006-45-4
90

G5 Lamp Holder



Contacting Making Plug Gauge for Finished Lamps 7006-47A-2
91 Double Ended Gauge 7006-47B-3 III IV V
92 Double Ended “Go” Gauge 7006-47B-3 I II
93

G13 Lamp Holder


Double Ended Gauge 7006-60B-4 III IV V
94 Double Ended “Go” Gauge 7006-60C-3 I II
95

GU5.3 Lamp Holder



“Go” Gauge 7006-73A-1
96 Gauge A 7006-73A-2
97 Gauge B 7006-126B-1
98

G9 Lamp Cap


“Go” Gauge 7006-129-1
99 “Not Go” Gauge 7006-129A-1
100 G5.3 Lamp Cap Gauge for Bi-pin Cap G5.3 on Finished Lamps 7006-73-1
101 GU5.3 “Go” and “Not Go” Gauge for Bi-pin Base 7006-109-1
102 GX5.3 “Go” and “Not Go” Gauge for Bi-pin Base 7006-73B-2
103 GY5.3 “Go” and “Not Go” Gauge for Bi-pin Base 7006-73C-2
104 2G10 “Go” Gauge for Caps on Finished Lamps 7006-118-1
105

GX10q








“Go” Gauge for Caps on Finished Lamps 7006-84-2
106 “Not Go” Gauge A for Caps on Finished Lamps 7006-84A-1
107 “Not Go” Gauge B for Caps on Finished Lamps 7006-84B-1
108 “Go” Gauges for Keys on Finished Lamps 7006-84E-1
109 “Not Go” Gauges for Caps on Finished Lamps 7006-84F-1
110

GY10q

“Go” Gauge for Caps on Finished Lamps 7006-85-2
111 “Not Go” Gauge A for Caps on Finished Lamps 7006-85A-1
112 “Go” Gauges for Keys on Finished Lamps 7006-85D-1
113 “Not Go” Gauges for Caps on Finished Lamps 7006-85E-1
114 G10q, GY10q “Go” Gauge 7006-79-2
115 G12 “Go” Gauge for Caps on Finished Lamps 7006-80-1
116 PG12,PGX12 Lamp Cap “Go” Gauge 7006-81-3
117 Fc2 Lamp Cap “Go” Gauge 7006-114-1
118 GR8 “Go” Gauge for Caps on Finished Lamps 7006-68-2
119 GR8 Gauge for caps to ensure entry of maximum lampholders and to check pin-spacing and length 7006-68A-2
120 GR8,GR10q “Go” Gauge for checking the pins of caps on finished lamps 7006-68E-1
121 GR8,GR10q “Go” and “Not Go” Gauge for checking the pins of caps 7006-68F-1
122 2G13 Lamp Cap “Go” Gauge 7006-33-2
123 2G72GX7 Lamp Cap “Go” and “Not Go” Gauge 7006-102-1
124 G23 Lamp Cap “Go” and “Not Go” Gauge 7006-69-2
125 GX23 Lamp Cap “Go” and “Not Go” Gauge 7006-86-1
126 G24GX24 Lamp Cap “Go” and “Not Go” Gauge 7006-78-3
127 GX32 Lamp Cap “Go” and “Not Go” Gauge 7006-87-2
128 G4 “Go” and “Not Go” Gauge for Bi-pin Lamp Bases 7006-72-1 A B
129 GU4 “Go” and “Not Go” Gauge for Bi-pin Lamp Bases 7006-108-2
130 GZ4 “Go” and “Not Go” Gauge for Bi-pin Lamp Bases 7006-67-1
131 G6.35GX6.35GY6.35GZ6.35 “Go” and “Not Go” Gauge for Bi-pin Bases 7006-61-5
132 G6.35GX6.35GY6.35 “Go” Gauge for Bi-pin Bases 7006-61A-3
133 GZ6.35 “Go” Gauge for Bi-pin Bases 7006-59B-1
134 GU7 “Go” and “Not Go” Gauge for Bi-pin Bases 7006-113-2
135 R17d “Go” and “Not Go” Gauge 7006-57-3
136 Fa6 “Go” and “Not Go” Gauge 7006-41-2
137 Fa8 “Go” Gauge 7006-40-1
138 Fa8 “Not Go” Gauge 7006-40A-1
139 2G11 “Go” Gauge 7006-82-1
140 B15 Lamp Holder “Go” Gauge 7006-12D-2
141

B15d Lamp Holder



“Not Go” Gauge 7006-12C-2
142 Gauge for checking contact position and contact force in bayonet lampholders 7006-15B-1
143 Gauges for the slots in the lampholders 7006-13-5
144

E17 Lamp Holder



“Go” Gauge 7006-25H-1
145 “Not Go” Gauge 7006-26C-1
146 Gauges for testing contact-making in lampholers 7006-26E-1
147 E26 “Go” Gauge 7006-25B-2
148 E26&E26d “Not Go” Gauge 7006-26A-2
149 E26d Plug gauge for testing protection against accidental contact in E26d lampholder 7006-29J-1
150

G6.35 Lamp Holder


Min. Retention Gauge 7006-61C-4
151 “Go” Gauge 7006-61B-4
152

G12 Lamp Holder





“Go” Gauge A 7006-80A-2
153 “Go” Gauge B 7006-80B-2
154 “Go” Gauge C 7006-80C-2
155 “Go” Gauge D 7006-80D-3
156 “Go” Gauge E 7006-80E-3
157 R7S Gauges for testing contact-making 7006-62-4
158 G5.3 Lamp Holder “Go” Gauge 7006-73A-1
159

GX53 Lamp Holder





“Go” Gauge A 7006-142A-1
160 “Go” Gauge B 7006-142B-1
161 “Go” Gauge C 7006-142C-1
162 “Go” and “Not Go” Gauge 7006-142G-1
163 “Not Go” Gauge 7006-142H-1
164 R7S Lamp Holder “Go” Gauge 7006-62-1
165 GX5 Lamp Holder “Not Go” Gauge 7006-142J-1
166 E5 Lamp Holder “Go” Gauge 7006-25F-1
167 “Not Go” Gauge 7006-25G-1
168 E10 Lamp Holder “Go” Gauge 7006-25-7
169 EP10 Lamp Holder “Go” Gauge 7006-37A-1
170 E10 Lamp Holder “Not Go” Gauge 7006-26-4
171 EY10 Lamp Holder “Not Go” Gauge 7006-26-4
172 EP10 Lamp Holder “Not Go” Gauge 7006-26-4
173 EY10 Lamp Holder “Go” Gauge 7006-7A-1
174 E11 Lamp Holder Gauges A for testing contact-making 7006-6A-1
175 Gauges B for testing contact-making 7006-6B-1
176 E12 Lamp Holder “Go” Gauge 7006-25C-1
177 “Not Go” Gauge 7006-26B-1
178 Contact-making 7006-32A-1
179 E17 Lamp Holder “Go” Gauge 7006-25H-1
180 “Not Go” Gauge 7006-26C-1
181 Gauges for testing contact-making 7006-26E-1
182 E26 Lamp Holder “Go” Gauge 7006-25B-2
183 “Not Go” Gauge 7006-26A-2
184 E26d Lamp Holder “Not Go” Gauge 7006-26A-2
185 E26 Lamp Holder Gauges for testing contact-making 7006-25J-1
186

E26d Lamp Holder

 

“Go” Gauge 7006-29K-1
187 Gauges for testing contact-making 7006-29G-3
188 Gauge for checking the radial position of the intermediate contact of lampholder 7006-29E-1
189 Gauge for testing the relative positions of the contacts in lampholder 7006-29F-1
190 Gauge for testing contact-making in metal-shell paper-lined lampholders 7006-29H-3
191 Plug gauge for testing protection against accidental contact 7006-29J-1
192 Gauge for testing unacceptable contact-making in lampholders 7006-29M-1
193 E39 Lamp Holder “Go” Gauge 7006-24E-1
194 “Not Go” Gauge 7006-26-4
195 Gauges for testing contact-making 7006-24D-1
196 Gauge for testing maximum insertion torque in lampholders with shell-grip features 7006-24F-1
197 Gauge for testing minimum insertion torque in lampholders with shell-grip features 7006-24G-1
198 E40 Lamp Holder “Go” Gauge 7006-25-7
199 “Not Go” Gauge 7006-26-4
200 Gauges for testing contact-making 7006-23-3
201 Plug gauge for lampholders for testing protection against accidental contact 7006-24-3
202 Torque Test Cap IEC 60238 Figure5
203 GX53 Lamp Cap “Go” and “Not Go” Gauge 7006-142-1
204 “Not Go” Gauge 7006-142D-1
205 “Go” and “Not Go” Gauge for checking keyways in caps 7006-142E-1
206 “Not Go” Gauge for checking keyways in caps 7006-142F-1
 

PREVIOUS：IEC 60061-3 Lamp Caps Partial Gauge NEXT：THE IMPORTANCE OF USING AN ISO/IEC 17025 ACCREDITED LABORATORY

RELATED NEWS

CATEGORIES

LATEST NEWS

CONTACT US

Contact: Eason Wang

Phone: +86-13751010017

E-mail: info@iec-equipment.com

Add: 1F Junfeng Building, Gongle, Xixiang, Baoan District, Shenzhen, Guangdong, China

close
QQ在线客服Eason Wang
QQ在线客服Lily Cai
SKYPE在线客服 Eason Wang
SKYPE在线客服 Lily Cai
close
Scan the qr codeclose
the qr code
Link Test Probe,Test Finger,Test PinLamp Cap GaugesPlug and Socket GaugeFlammability Testing EquipmentHipot TesterLoad CellsSpring Hammer Testing EquipmentLampholder GaugesIP Testing EquipmentElectrical Safety Test ApparatusLED Testing EquipmentInstrument AccessoriesOther Testing Equipment
TAGS Test Probe BTest Probe 18Test Probe 14Test Probe 17Test Probe 32Test Probe 1Test Probe 2Test Probe 12Test Probe 31Test Probe ATest Probe 41Test Probe 19Test Probe DTest Probe CTest Probe 13Test Probe 11Test Probe 43Test PinTest FingerTest Probe